Drill bits

 

 

movie-sigma2

tag

  Frese diamantate
Diamond Drill Bit
Fraises diamantées
Diamantfräser
35 mm
Per foratura a secco
o acqua su: Gres
porcellanato, Marmo,
Granito, ecc. At-
tacco: esagonale
9mm / filettato M14
For dry or wet drilling
on: porcelain gres, mar-
ble, granite, etc.Fixing:
9mm Hex / Thread M14
Pour effectuer des
trous à sec ou à l’eau
sur: Grès porcellainé,
Marbres, Granit, etc.
Attache: hexagonal
9mm / filet M14
Fur Trocken oder nass-
bohren von:
Feinsteinzeug, Marmor,
Granit, usw.
Anschluss: 9mm Hex /
M14 Gewinde
Art. Descrizione Description Uso Durata
FRESE DIAMANTATE “FAST”
per foratura a secco o acqua
(confezionate in blister)
(velocità raccomandata / max rpm.)
DIAMOND DRILL BIT
“FAST”
for dry or wet drilling
(pakaged in blister)
su gres
porcellanato
10mm
53006 Fresa Ø mm 6 (1000 / 1500 rpm.) Drill Bit Ø 6 mm 1
circa
50
fori
53008 Fresa Ø mm 8 (1000 / 1500 rpm.) Drill Bit Ø 8 mm 1
53010 Fresa Ø mm 10 (1000 / 1500 rpm.) Drill Bit Ø 10 mm 1
53012 Fresa Ø mm 12 (1000 / 1500 rpm.) Drill Bit Ø 12 mm 1
53020 Fresa Ø mm 20 (6000 / 11000 rpm.) Drill Bit Ø 20 mm 1
circa
60
fori
53025 Fresa Ø mm 25 (6000 / 11000 rpm.) Drill Bit Ø 25 mm 1
53030 Fresa Ø mm 30 (5000 / 11000 rpm.) Drill Bit Ø 30 mm 1
53035 Fresa Ø mm 35 (4000 / 11000 rpm.) Drill Bit Ø 35 mm 1
53040 Fresa Ø mm 40 (4000 / 11000 rpm.) Drill Bit Ø 40 mm 1
53050 Fresa Ø mm 50 (4000 / 11000 rpm.) Drill Bit Ø 50 mm 1
53060 Fresa Ø mm 60 (3000 / 11000 rpm.) Drill Bit Ø 60 mm 1
53070 Fresa Ø mm 70 (3000 / 11000 rpm.) Drill Bit Ø 70 mm 1
Per foratura ad acqua con
trapano su: Gres porcellanato,
Klinker, Monocottura, Marmi duri,
Granito,Vetro. Con gambo di
fissaggio, fresato antirotazione.
Durata: usata correttamente può
fare più di 150 fori su gres porcel-
lanato spessore 1 cm.
For drilling with water, on: porce-
lain gres, klinker, Single-fired, hard
marble, granite, glass.Duration:
used correctly, it can make more
than 150 holes on Porcelain gres
thickness 1 cm.
Pour la perforation à l’eau,
avec foret, sur: Grès porcel-
lainé, Klinker, mono-cuisson,
Marbres durs, Granit, Verre.
Durée: utilisée correcte-
ment, elle peut faire plus de
150 trous sur de Grès porcel-
lainé épaisseur 1 cm.
Zum Nassbohren mit Bohrer
von:Feinsteinzeug, Klinker,
Steinzeug, harte Marmorar-
ten, Granit, Glas. Mit
Befestigungsschaft, gefräst
und Rotationssicherung.
Lebensdauer: mehr als 150
Löcher bei 1 cm dickem
Feinsteinzeug wen richtig
angewendet
Art. Descrizione Description
FRESE DIAMANTATE
attacco univesale
antirotazione Ø12mm
(confezionate in blister)
(velocità max rpm.)
DIAMOND DRILL BIT,
Ø12mm shank universal
antirotation
(confection in blister)
87D2 Guida per foratura con
contenimento acqua
Guide for perforation with
control water
1
107511 Punta per centratura
(solo su materiali teneri)
Centering drill for guide
(only on soft materials)
1
53A- Fresa Ø mm 6 (8000 rpm) Drill Bit Ø 6 mm 1
53B- Fresa Ø mm 8 (6200 rpm) Drill Bit Ø 8 mm 1
53- Fresa Ø mm 10 (5000 rpm) Drill Bit Ø 10 mm 1
53D- Fresa Ø mm 20 (2500 rpm) Drill Bit Ø 20 mm 1
54BA- Fresa Ø mm 27 (2000 rpm) Drill Bit Ø 27 mm 1
55- Fresa Ø mm 35 (1400 rpm) Drill Bit Ø 35 mm 1
56- Fresa Ø mm 40 (1250 rpm) Drill Bit Ø 40 mm 1
57A- Fresa Ø mm 60 (800 rpm) Drill Bit Ø 60 mm 1
58- Fresa Ø mm 65 (760 rpm) Drill Bit Ø 65 mm 1
59B Fresa Ø mm 115 (400 rpm) Drill Bit Ø 115 mm 1
100533
Stick per ravvivatura
utensili diamantati
cm.21,5x10x5,5
Grindstone for dress-
ing the diamond tools
cm.21,5x10x5,5
1
100533
MADE IN ITALY
Art. Descrizione Description
FRESE DIAMANTATE
per foratura a secco
con FLEX
velocità raccomandata 4000 rpm
velocità max 11000 rpm.
DIAMOND DRILL BIT,
for dry boring with FLEX
raccommended speed 4000 rpm
max speed 11000 rpm.
55S- Fresa Ø mm 35 Cutter head Ø 35 mm 1
57AS- Fresa Ø mm 60 Cutter head Ø 60 mm 1
58S- Fresa Ø mm 65 Cutter head Ø 65 mm 1
MADE IN ITALY
Per foratura a secco con FLEX su: Gres porcellanato, Klinker, Monocottura,
Marmi duri, Granito. Attacco filettato M14 5/8” UNC a richiesta
Usata correttamente può fare più di 60/90 fori su gres porcellanato spessore
1 cm.
For dry drilling with FLEX on: porcelain gres, klinker,
Single-fired, hard marble, granite. Thread M14 5/8” UNC on request
Used correctly, it can make more than 60/90 holes on Porcelain gres
thickness 1 cm.
Pour effectuer des trous à sec avec FLEX sur:
Grès porcellainé, Klinker, Granit ,mono-cuisson, Marbres
durs.
Attache filet M14 5/8” UNC sur demande
Utilisée correctement, elle peut faire plus de 60/90 trous sur
de Grès porcellainé épaisseur 1 cm.
Zum Trockenbohren mit FLEX von:Feinsteinzeug, Klinker,
Steinzeug, harte Marmorarten, Granit.
Anschluss mit M14 5/8” UNC Gewinde auf Anfrage
Mehr als 60/90 Löcher bei 1 cm dickem Feinsteinzeug wen richtig
angewendet
107511

[collapse]